Posts Tagged ‘Porsche Cayman’

Phase II OBC unit instllation

The Phase II Decoder, designed with the Porsche Cayman, 911 and Boxster in mind, but just at home with the likes of Aston Martin, Audi, Bentley, BMW, and a majority of other makes.
We have tried this decoder on several Porsches, the Boxters were 99% successfull, the 911 (997) we had a mixed set of results as did we with the Cayman.
By mixed set of results we mean, the hid kit / xenon kit worked and drew enough power to keep working on the Porsche 911 and cayman, however in some rare instances the on board error came on (just the once, and the tell tale sign was on, but there was no annoying continuous error messages appearing frequently).
Here is the installation guide.
There are two distinct parts to the decoder, one is a relay and one is the main body (both these parts are supplied as pairs, to cover each of the two lights).
Connecting the Phase II Decoder

Connecting the Phase II Decoder

A – Connect to battery, Red to +ve, Black to -ve.

B – Connect to original wiring loom tho which the halogen bulb was originally connected to; Red to +ve, Black to -ve.

C – Male end socket, this connects to the female end on the main body (d)

Connecting the Phase II Decoder

Connecting the Phase II Decoder

 

 D – Connects to the male end from the harness (C)

E – Connects to the female end of the ballast (receiving end)

Once you have done this, repeat steps A-E for the other side (the other lamp).

In short this harness acts as a mid point between the cars original wiring loom and the hid conversion kit.

What this harness will 100% achieve for the Cayman and the 911 997, is a constant power feed in a controlled manner.

For further information, please contact us on: 0207 183 3090

Porsche h6w error

porsche cayman H7 hid conversion with h6w canbus led The side lights (as seen in the grills on the bottom) are h6w.

The h6w halogen bulbs are a standard fitment on the most porsches.

The h6w led bulbs usually produce on board errors on the porsche system.

Enter the canbus h6w error free led bulb.

We call the h6w bulb a ba9xs, it is exactly the same fitment as a h6w bulb, were a standard h6w led bulb will produce error codes, our ba9xs canbus led bulbs get around that annoying problem.

Get the look: ba9xs canbus (h6w error free)

for further information please contact us on 0207 183 3090

Porsche 911 997 D2S Bulb Upgrade

D2S bulb replacement on a Porsche

This Porsche’s  factory fitted D2S bulbs had blown and to be honest the car wasn’t even that old!

Autolights replaced this 997 factory fitted D2S 4300k bulbs at a fraction of the cost.

Although only one D2S bulb had blown, we replaced the pair, uprated the temperature to 6000k and fitted it for free.

For further information  call us on 0207 183 3090

HID Conversion on Porsche Cayman S

 

Porsche Cayman S Hid Conversion 6000k and Ba9xs Canbus Led upgrades

Porsche Cayman S Hid Conversion 6000k and Ba9xs Canbus Led upgrades

H7 Hid conversion successfully installed on Porsche Cayman with PCM (and without).

 

Many people have failed to stop the error lights and constant flickering and light failure on the Porsche Cayman, but autolights has it covered.

We have developed a specialised decoder which we are already supplying to trade, and we are offering it to you.

If you have had a problem with your Hid conversion kit on your Cayman or Cayman S, get in touch today.

For more information please call: 0207  183 3090

Return top

INFORMATION

Change this sentence and title from admin Theme option page.