Posts Tagged ‘Bmw’
Whatever make of Renault you have including;
Renault Twingo (1996-)
Renault Clio (2001-)
Renault Megane MKII (1999-2008)
Renault Megane MKIII (2008-)
Renault Laguna MKII (1999-2008)
Renault Laguna MKIII (2008-)
Renault Koleos
Renault Espace (2003-)
Whatever make of BMW you have including;
BMW 1 series (E87) H7R HID CONVERSION KIT
BMW 3 series (E30) H1 HID CONVERSION KIT
BMW 3 series (E36) H1 HID CONVERSION KIT
BMW 3 series (E46) H7R HID CONVERSION KIT
BMW 3 series (E90) H7R HID CONVERSION KIT
BMW 5 series (E60) H7R HID CONVERSION KIT
BMW 5 series (E39) H7R HID CONVERSION KIT or HB4 (9006) HID CONVERSION KIT
BMW 7 series (E38) H1 HID CONVERSION KIT or H7R HID CONVERSION KIT
BMW 7 series (E65) H7R HID CONVERSION KIT
BMW 3 series Compact (E36) HB4 (9006) HID CONVERSION KIT
BMW 8 series (E31) H1 HID CONVERSION KIT
BMW X5 (E70) H7R HID CONVERSION KIT
BMW Z3 (1996-2002) HB4 (9006) HID CONVERSION KIT
BMW Z4 E85 (2003-2008) H7R HID CONVERSION KIT
BMW 5 series (F10) H7R HID CONVERSION KIT
standard h8 angel eye upgrade e92 m3
Not all angel eye upgrades are the same!
This BMW M3 (E92) came in with an aftermarket H8 angel eye conversion, which to be honest is miles better than the original factory fitted angel eyes that come standard with with most new BMW’s particularly the E92 BMW.
If you are going to buy a car like this, get the upgrades your car deserves.
Autolights.co.uk upgraded the entire interior, inside of the boot and even put in better H8 angel eye upgrade Led components.
See the image below.
AUTOLIGHTS h8 angel eye upgrade e92 m3
Once we finished with the E92 M3, the angel eyes were exactly what the customer was after!
Our H8 canbus angel eye upgrade is considerably brighter than whats on the market, sure, most of the angel eye upgrades look the same, but as you know by now, looks can be deceiving.
The finished article is the BMW E92 M3 the way you know its meant to be!
Get the look: H8 angel eye upgrade
For more information, please contact us: 0207 183 3090
D1 Ballast Replacement retro fit
The D1 ballast on factory fitted spec cars is commonly seen on later Porsches, including the Panamera, Aston Martins, Cayenne, BMW and Land rover to name but a few.
Autolights D1 Ballast Replacement kit includes the ballast and all necessary wiring to get the lights on you vehicle working again.
Our D1 ballast kit, simply ‘piggy bags’ on the existing set up, so you do not need to remove the existing factory fitted D1 ballast saving you time and cost, and making to whole process easier for a DIY novice.
Its a 4 step process to connect the D1 ballast.
This is a simple 4 step process to replace the D1 ballast on your vehicle.
For further information please contact us on 0207 1833090
Hid conversions do not get more simpler than this.
This Bmw E46 (3 series) opted for a H7 hid conversion for the dipped beam.
We also converted the fog lights with a 9006 (HB4) hid kit, also 600k.
Since this E46 model had projector lenses there was no requirement for an additional E46 bulb holder as per the non projector model.
The fog lights can be removed by removing the shroud on the front and undoing the relevant bolts.
For further information please contact us on 0207 183 3090
5 Series E60 HID CONVERSION H7R 6000k Dipped Beam and Fog Lights
BMW E60 5 Series.
This 5 Series which comes with the reflector lens (non – projector), had the H7R anti glare canbus hid kit fitted with obc units.
The fogs had a 9006 hid kit upgrade.
The parking lights were upgraded by the use of T10 canbus led bulbs.
The interior was also upgraded as were the number plate lights with Can Bus festoon Led bulbs.
Installation – Its really quite straight forward.
1. Remove the rubber strip that runs above the grill (between the hood and the grill).
2. Remove 2 torque screws from each side (the two outer most, total removed = 4), this will allow you to flex the top of the grill, making it easier to remove the E60′s headlamp and install a HID kit.
3. on the rear of the head lamp housing remove the inner dust caps.
4. Each head light housing will now have 4 Torque screws, Two on the top – remove these completely. the other two are behind the headlamp slightly lower, you can also use an 8mm socket set (loosen these screws only – do not remove them)
5. Twist the headlamp out and insert the HID components.
6. Put it all back together again.
Get the look:
For further information please contact us – 0207 183 3090
D2S ballast
When your factory fitted D2S ballast fails you (and it will eventually!), there is no need to pay over the odds for the D2S ballast.
Autolights offer a range of products to get your lights back upto speed.
The D2S ballasts can be by-passed using our D2S ballast repair kits which are specifically designed to fix the problem.
And the great thing about this is that you do not even have to remove the factory fitted D2S ballast!
Simply take the D2S ballast supplied by Autolights.co.uk along with the D2S harness, and connect the power feed cables from the D2S ballast repair kit to the cars existing live and earth wires (source these wires from the plug that goes into the rear of the headlight housing).
Ballast Replacement - D2S bulb
This Range Rovers left hand sideD2S ballast failed, after the owner was given a qoute from Range Rover for over £800.00, Autolights.co.uk stepped in.
We by-passed the faulty ballast by using our D2S repair kit and even gave the car a D2S 10000k upgrade upon the clients request.
Total spend £95.00
Do the math!
For further information, please feel free to call us – 0207 183 3090
Autolights canbus pro HID KIT for the bmw E90 3 series.
Autolights has supplied and installed numerous hid kits for this BMW 3 series model.
When installing this kit, it is advisable to gain access through the access points in the wheel arh on wither side.
Simply replace the H7 halogen bulbs with the H7 Hid kit.
Side light upgrades used for this car are the T10 canbus led bulbs
Number plate upgrades used for this car are the Canbus festoon led bulbs (39mm)
For more information please contact us on 0207 183 3090
BMW Z4 xenonConversion - 6000k
Autolights fitted this BMW Sports convertible with a H7 Hid kit (6000k)
In order to fit the hid conversion kit to this car, access was gained via the access flap on either side.
The H7 halogen bulb was replaced with an autolights hid conversion kit with the 6000k colour.
The side lights were also replaced with the T10 Canbus Led.
The number plate lights were also replaced with the T10 Canbus led light.
NOTE: This particular model much like the BMW 1 series has a distinct problem with condensation, so we strongly suggest that after placing the H7 hid kit, and replacing the cover back, you use a sealant around the cover to prevent excessive mositure from getting inside the head lampl housing.
Get the look - BMW Z4 HID KIT
Side lights – T10 canbus
For more information please contact us on 0207 183 3090
BMW 1 Series hid conversion kit by Autolights.
No on board errors, no flickering.
The autolights canbus pro hid kit is a simple plug and play kit, and is well equipped for the bmw 1 series.
When installing autolights canbus pro hid kit, there is no need toremove the headlight completeley, simply remove the back cover and replace the halogen H7 bulb with a H7 hid bulb from the canbus pro hid kit.
And changing the side lights to Led are just as simple, just remove the T10 / 501 halogen bulbs and replace with the T10 canbus led bulbs.
The hid kit installed in this car was a H7R (anti glare) 6000k canbus pro slim line kit.
Do not forget to replace the cover on the back of the light!
NOTE: This particular model much like the BMW Z4 has a distinct problem with condensation, so we strongly suggest that after placing the H7 hid kit, and replacing the cover back, you use a sealant around the cover to prevent excessive mositure from getting inside the head lampl housing.
For further information please call:- 0207 183 3090