Whatever make of BMW you have including;

BMW 1 series (E87) H7R HID CONVERSION KIT

BMW 3 series (E30) H1 HID CONVERSION KIT

BMW 3 series (E36) H1 HID CONVERSION KIT

BMW 3 series (E46) H7R HID CONVERSION KIT

BMW 3 series (E90) H7R HID CONVERSION KIT

BMW 5 series (E60) H7R HID CONVERSION KIT

BMW 5 series (E39) H7R HID CONVERSION KIT or HB4 (9006) HID CONVERSION KIT

BMW 7 series (E38) H1 HID CONVERSION KIT or H7R HID CONVERSION KIT

BMW 7 series (E65) H7R HID CONVERSION KIT

BMW 3 series Compact (E36)  HB4 (9006) HID CONVERSION KIT

BMW 8 series (E31) H1 HID CONVERSION KIT

BMW X5 (E70)  H7R HID CONVERSION KIT

BMW Z3 (1996-2002) HB4 (9006) HID CONVERSION KIT

BMW Z4 E85 (2003-2008) H7R HID CONVERSION KIT

BMW 5 series (F10) H7R HID CONVERSION KIT

Click here to go to our BMW HID Kits product page

5 Series E60 HID CONVERSION H7R 6000k Dipped Beam and Fog Lights

BMW E60 5 Series.

This 5 Series which comes with the reflector lens (non – projector), had the H7R anti glare canbus hid kit fitted with obc units.

The fogs had a 9006 hid kit upgrade.

The parking lights  were upgraded by the use of T10 canbus led bulbs.

The interior was also upgraded as were  the number plate lights with Can Bus festoon Led bulbs.

Installation – Its really quite straight forward.

1. Remove the rubber strip that runs above the grill (between the hood and the grill).

2. Remove 2 torque screws from each side (the two outer most, total removed = 4), this will allow you to flex the top of the grill, making it easier to remove the E60′s headlamp and install a HID kit.

3. on the rear of the head lamp housing remove the inner dust caps.

4. Each head light housing will now have 4 Torque screws, Two on the top – remove these completely. the other two are behind the headlamp slightly lower, you can also use an 8mm socket set (loosen these screws only – do not remove them)

5. Twist the headlamp out and insert the HID components.

6. Put it all back together again.

Get the look:

H7 HID KIT

OBC units

T10 Canbus

Interior lighting

Festoon Canbus

For further information please contact us – 0207 183 3090

Autolights offers complete kits the 1,3,5,7  sereis angel eye conversion.

Change the dull angel eye colour to a bright white LED driven colour.

We have also offer unique LED angel eye conversions for the E46 (projector and non projector) which unlike CCFL conversions are a lot brighter, and can be wired up so that they act as day time running ligths, and courtesey lights!

Get the look – E39 bmw 5 series angel eye upgrade

The later model 3, series which have factory fitted angel as standard use H8 bulbs which double as daytime running lights. Autolights upgraded this 3 series with the H8 angel eye upgrade.

This angel eye upgrade is a simple plug and play system, simply remove the existing H8 halogen bulb, and replace with the autolights H8 canbus driven angel eye replacement.

No Errors!

Get the look – H8 angel eye upgrade

This upgrade is suitable for the following models:

E63/64/70/71/82/87/90/91/92/93

BMW 5 Series non projector angel eye upgrade T10 Canbus

Got an E60 5 series without factory fitted projectors?

The angel eyes you have on them are not true angel eyes, but have the same effects regardless.

You can replace the dull looking colour by upgrading to canbus T10 side lights.

The end result will be brighter angel eyes, ice white in colour.

Get the look for your BMW click the  following link: E60 angel eye conversion

For more information please call: 02071833090